Concrete prices in District of Columbia

Concrete in District of Columbia typically costs $132–$163 per cubic yard in 2026 — 10.8% above the U.S. range of $119–$147. District of Columbia ranks 2 of 51 from most to least expensive.

%

Ready-mix material cost

$1,035–$1,204

  • Concrete needed5.43 cubic yards
  • Short-load fee included$319
  • Installed slab (labor + material)$2,216–$4,432
  • Area400 ft²

Estimates only. Round up when you order, and confirm structural details with your local building code.

Typical concrete costs in District of Columbia

ItemDC typical range
Ready-mix, per cubic yard (10+ yd³ order)$132–$163
Ready-mix, per cubic yard (short load under 10 yd³)$191–$222
10 × 10 ft patio, 4 in (1.4 yd³ with waste) (short-load fee included)$267–$310
20 × 20 ft slab, 4 in (5.4 yd³ with waste) (short-load fee included)$1,029–$1,197
24 × 24 ft garage slab, 6 in (11.7 yd³ with waste)$1,543–$1,906
Installed slab, per ft² (labor + material)$5.54–$11.08
Installed 20 × 20 ft slab$2,216–$4,432

District of Columbia vs. neighboring states

StateTypical per cubic yardvs. U.S.
Virginia$120–$148+0.7%
Maryland$124–$153+4.0%
District of Columbia$132–$163+10.8%

The lowest typical prices among District of Columbia and its neighbors are in Virginia. If you live near the state line, a supplier across the border may be worth a quote — but delivery distance usually decides the final price.

What affects the price

Ready-mix prices depend on cement and aggregate costs, the distance from the batch plant, the mix strength (PSI) and additives, and how much you order — loads under 10 cubic yards carry a short-load fee.

The numbers on this page are estimates for planning. They take a national 2026 price range and scale it by District of Columbia's overall price level (110.8 against a U.S. average of 100). Prices within the state can differ a lot between a metro area and a rural county.

Sources